|
|
|
 |
Key Features |
| |
High quality digital satellite TV & radio receiving (DVB-S) -- TwinhanDTV Sat supports only free-to-air
 programs
High speed Internet via satellite -- You need to apply an Internet ISP account first
DVB data service
Instant recording -- Record digitally as MPEG II format. 1 hour digital TV program is about 1.7G
Schedule recording -- You can set your own recording list and playback whenever you like
Time-shifting -- You can pause live TV shows and never miss any marvelous moment!
Electronic program guide (EPG) -- EPG tables offer the most updated channel information
Teletext -- Teletext page is only available in certain areas
Still frame capture
Multi channel preview matrix
Support DiSEqC1.2 & USALS
Transponder & satellite auto scan
Viewing & schedule recording different channels simultaneously
16:9 wide screen
Multi-language output
Hot Keys
Favorite list
Video quality adjustment
MPEG II software decoding
Software upgradeable
Support remote control |
|
|
|
Specification |
| |
| Tuner | Input terminal: F-type 75 Ohm
Receiving frequency: 950~2150 MHz tuning range
Input level: -65~-25dBm
Support MCPC and SCPC | | QPSK & FEC | Symbol rate: 2~45Msps
QPSK filter: Root-raised cosine filter with roll-off 0.35
FEC: 1/2,2/3,3/4,5/6,7/8 and Auto | | LNB & Switch control | LNB supply voltage: 13V/18V
DiSEqC: 1.2
Support Data Burst & Tone Burst
Antenna and LNB control: 22KHz Tone
Max. LNB supply current: 400mA with short circuit and surge protection | | PCI interface | PCI bus: PCI 2.2 compliant
Host bus burst rate: 132 MB/S
Host bus width: 32 bit | | Demultiplexing | Max No. Section filtering: 32PIDs
Engine: software
Stream capture: PES & TS | | A/V Format | Video format: MPEG-II Main Profile& Main Level
Audio format: MPEG-II Audio layer I & II |
|
|
|
|
System Requirements |
| |
Windows 2000/XP
600MHz CPU or above
128M RAM or above
VGA Card with at least 8MB Memory
Sound Card
Microsoft Direct X 8.1 or above
Digital Satellite Dish & LNB |
|
|
Retail package |
| |
TwinhanDTV Sat card
Quick installation guide
Driver CD (Multi-lingual Software and User's
Manual) |
|
NOTE: The 2 F-Connectors you see on the board are as follows: One is used for the satellite signal input. The other is used as loop-through to connect the signal to another satellite receiver. It is not intended to connect it to a TV.
To be able to view the picture on your TV, your PC must have a video output. Otherwise, you are limited to viewing the channels on your computer screen.
