This is the smallest HH motor in the market today. High quality and excellent performance. Works with all DiSEqC 1.2, 1.3, USALS or "Goto X" compliant receivers.
The HH90 motor is a new design, and unique compared to the existing HH100 and HH120 motors. The motor is ideal for dishes up to 95cm in size (22LBS in weight). The rotation speed has been improved by 25%. This is due to the “universal” nature of its design. Historically, motors have been better suited for the European style dish-mounts, which utilize U-bolts to attach to the mounting pole. The HH90 motor can be easily installed with both European style and North American style dish-mounts. This means consumers can buy the HH90 motor with confidence knowing that it will be compatible with their dish up to 95cm in size.
Of course, the HH90 motor also uses STAB’s proprietary USALS technology making installation easy and reliable. All of our Fortec Star receivers are compatible with the USALS standard.
Once the satellite positions have been programmed in the system, the STAB HH Motor returns the dish to exactly the correct location when you switch channels.
NOTE: Tighten all the coaxial cable connections only by hand. Using a wrench may over-tighten the connections, causing damage. Such damage is not covered by the Limited warranty.
This motor will work with the following dishes amongst others:
Standard Shaft Size: 1 5/8" (42mm) Small shaft diameter to fit most dishes.
The principal of a motorized system is that the dish moves from east to west to track the satellites positioned along the Clarke belt.
This is a DiSEqC 1.2 and USALS compliant motor mount. It utilizes a data stream passed up the LNB co-axial lead to the mount. Only one co-axial cable (the one that goes to the LNBF) is needed for installation. Maxintelligence precision calibration allows the motor to go to the satellite accurately every time.
Operating protocol
DiSEqC 1.2, USALS
Maximum antenna diameter
95 cm (37")
Maximum antenna weight
10 Kg (22 lbs)
Pole support diameter
Dia 35 to 68mm
Antenna support length
145 mm (5.5")
Antenna support diameter
42 mm (1 5/8")
Rotation angle
±65 °
Rotation speed
2.4°/s (18V);1.5°/s (13V)
Operating power supply
13 / 18 Vdc
assorbimento in stand-by
40 mA
Consumption in stand-by mode
180 mA
Consumption in operating mode
350 mA
Operating temperature
-40°C ÷ +80°C
Maximum relative humidity
100%
Programmable positions
49 satellites
Programmable positions USALS
no limits
Preset positions
28 satellites
Connectors
F Type
Connection
Sat coaxial cable
Mechanical limits
±72°
Software programmable limits
From 5° a 65°
Fine tuning
Impulse 0,1°
Inclination on the pole
From 10° a 70°
Weight
2.6 Kg (5.5 lbs)
Wiring Diagram
No extra lines needed. HH Motor gets its power and signal from the
same RG6 coaxial cable going to the LNBF.
Compare the STAB HH90 Motor
View the comparison chart of the STAB HH90 motor vs. other brands ... (COMPARISON)
NOTE: Tighten all the coaxial cable connections only by hand. Using a wrench may over-tighten the connections, causing damage. Such damage is not covered by the Limited warranty.