Combolook

The Combolook is a combination of Satlook Digital NIT & TV Look in one unit.

The COMBOLOOK is a Swedish made SAT-TV/CATV instrument and spectrum-analyzer. It is a combination of SATLOOK Digital NIT and TVLOOK in one unit. The unit is made for exact alignment and adjustment of satellite-dishes, aerial antennas. It is also an excellent tool for working with Cable-TV networks. It is intended for professional use when high accuracy and precise information are needed. It's easily operated without a lot of unnecessary buttons and knobs. The basic functions are easy to get a hold on and takes only minutes to learn.

The instrument is provided with a 4.5" B/W-monitor which either shows normal TV-channel, the frequency spectrum 2-2150 MHz (or parts thereof) alt. Digital data. Menus/help displays are shown on the LCD-screen (64x128) beside the monitor.

Both analog SAT-TV and CATV channels can be tuned in and viewed upon. The COMBOLOOK is able to work with the return-path signals in Cable-TV networks (5-65 MHz). according to the EN50083 standard. The TV-part presents the full range spectrum of 2-900 MHz which can be zoomed into smaller parts (min 13 MHz-span). The TV-part is very sensitive and accurate. It presents signals ±1dB (at +20 C). The SAT-part also has very high resolution and accuracy.

It presents measured data ±2 dB (at 20 C). The Sat-TV spectrum can be expanded (zoom in) for correct adjustment of the polarization (“cross-polarization”). The SAT- part presents, under one of the sub menus, digital information like BER (bit error rate), constellation-diagram (QPSK) and S/N (signal/noise ratio). The NIT function of the SAT-part can identify the various TV-satellites by reading out the NIT in the Bitstream (NIT = Network Information Table). The NIT also contains info about the transponders TV and Radio channels. COMBOLOOK can handle a lot of memory-positions and both spectrum-pictures and certain frequencies can be saved (both analog and digital transponders). The power of the instrument is supplied by a built in and rechargeable battery.

Owner's Manual

COMBOLOOK Technical specification.

• Input frequency: 5-900 Mhz and 920-2150MHz.

• Sat-TV min level in: About 35 dBuV (noise).

• Sat-TV max level in: About 90 dBuV.

• CATV max input level, picture: 110 dByV.

• Spectrum: 120 dByV.

• Sat-TV attenuation: 15 dB attenuator on/off.

• CATV attenuation: 45 dB in 1 dB step.

• Display of signal level (analog): dB on LCD/monitor.

• Pitch-tone.

• Sat-TV accuracy: +2 dB (at +20 C)

• CATV accuracy: +1dB (at +20 C)

• CATV resolution bandwidth: 1 MHz or 300 kHz.

• CATV video bandwidth: 100, 10 ,1 kHz or 100Hz

• Sat-TV Digital display of signal level: S/N (signal/noise-ratio)

• BER (bit error rate)

• Constellation (QPSK)

• Satellite-identification: Yes, by reading out the NIT in the Bit stream. Info about the TV and Radio channels.

• TV standard: Multi TV/ (PAL, NTSC, SECAM).

• CATV text-TV (CEEFAX): Yes.

• KU- C-band: Yes, selectable.

• Input impedance: 75 Ohm, BNC-con.

• Picture-screen: 4.5”-monitor, B/W

• Menus: On LCD 64x128.

• Memory: Lots of spectrum pictures can be stored with name. Stored spectrum can be mixed for easy identification of satellite. “Maxhold”-function.

• Favorite channels Both analog and digital frequencies can be stored (with name).

• PC-connection: RS232-output and PC-software.

• Sat-TV power out: Yes, 13-18V.

• CATV power out: On/off. 15-24 volt.

• Sat-TV control: 22 kHz, DiSEqC, DiSEqC/SatScan/ SatSelect-positioner.

• DiSEqC Yes, all 1.0 and 1.1. Also Tone burst on/off.

• DiSEqC actuator: Built in positioner for DiSEqC 1.2, SatScan and SatSelect.

• Battery: Rechargeable 12v, 7 amp/hour.

• Weight: About 7 kg incl. battery.

• Accessories: Nylon carrying-case.

• Car-charger, BNC/F-adapters.

• Power-supply of 100-240V, 50/60 Hz, 13.5v, 1.7amp.